Statute of Limitations for Premises Liability / Slip and Fall in Wyoming

Overview

In Wyoming, the statute of limitations (SOL) for most premises liability claims—including slip-and-fall injuries—is 4 years under Wyo. Stat. § 1-3-105(a)(iv)(C).

In other words, Wyoming generally uses its general limitations framework rather than a separate, premises-specific SOL deadline. For slip-and-fall cases, the most practical takeaway is that you typically start counting the limitations period from the date the claim accrues—often when the injury occurs, or when the injured person knew or reasonably should have known they were injured and that the injury related to the incident.

DocketMath helps you turn that baseline rule into a usable filing deadline by calculating the last day to file based on the dates you enter (such as the accident/injury date and any relevant discovery or knowledge date).

Limitation period

For most premises liability / slip-and-fall actions in Wyoming, the relevant baseline SOL period is 4 years: Wyo. Stat. § 1-3-105(a)(iv)(C).

What to use as the “start” date (accrual)

The key input for SOL calculations is the accrual or trigger date—commonly:

• Accident date: the day the slip/fall happened; and/or
• Discovery/knowledge date: the date the injured person knew or reasonably should have known:

  1. they were injured, and
  2. the injury was connected to the incident on the premises.

In real-world cases, these dates are not always the same. For example, some injuries are not fully apparent at the time of the fall, and symptoms may worsen later.

How the deadline typically behaves

With the baseline rule, the calculation generally follows this pattern:

• Take the relevant start/accrual date, and
• Add 4 years to get the approximate filing deadline,
• Then consider whether any tolling or exception could extend or pause the period.

Because SOL timing can be sensitive, it’s often helpful to sanity-check your dates against a calculator—especially when injury symptoms or awareness began later than the accident date.

Key exceptions

While the 4-year general/default SOL is the baseline, certain circumstances can change the practical deadline. Here are the main areas to check.

1) Tolling based on legal disability

Tolling (pausing or extending) can apply in certain situations involving legal disabilities—such as minority (age) in contexts where a statute provides for tolling. If tolling applies, the effective “clock” may start later or be paused, meaning the deadline may be later than a straightforward “4 years from the accident date.”

2) Delayed discovery / concealment-based theories

If a defendant’s actions prevented the injured person from discovering the claim, the issue may become more about when the claim reasonably should have been discovered rather than only when the accident occurred. Depending on the facts, a court may treat knowledge/discovery timing as central to accrual.

Practical tip: If symptoms were initially minor or unclear, and you only later learned they were tied to the slip/fall, the “knowledge date” can matter.

3) Additional procedural requirements in specific contexts

Sometimes the case can be affected by procedural steps that are not truly “premises liability SOLs,” but still act like a deadline in practice (for example, certain filing/notice requirements tied to particular defendant types or situations). These are not new SOL time periods for premises liability in the general sense—but they can still block a claim if missed.

Practical checklist for exception hunting

Before finalizing any deadline calculation, consider:

• What is your start date: accident date vs. discovery/knowledge date?
• Was the injured person a minor at the relevant time?
• Is there any reason discovery was delayed (e.g., symptoms were unclear, or there was concealment)?
• Are you suing a party type that could trigger additional procedural steps?

Statute citation

Wyoming’s general limitations period commonly used as the baseline for many civil actions (including premises liability / slip-and-fall claims) is:

• Wyo. Stat. § 1-3-105(a)(iv)(C) — 4 years

No claim-type-specific premises liability sub-rule was identified in the provided materials; therefore, the 4-year general period above is the correct starting assumption for this reference page.

Use the calculator

Run your deadline using DocketMath’s statute-of-limitations tool here:
**/tools/statute-of-limitations

Suggested inputs

To get the most accurate output, consider entering:

1. Injury (or incident) date (often the slip/fall date)
2. Claim discovery/knowledge date (if different)
3. Which trigger the calculator should use (if your interface allows selection)

How outputs change when you change inputs

Treat the calculator like a “timeline generator.” Generally:

• If you use the accident date as the start, your deadline is usually earlier.
• If you use a discovery/knowledge date, your deadline may move later, reflecting that the claim may not have accrued until you knew (or should have known) the injury and its connection to the incident.
• If tolling applies to your facts, the effective deadline can extend beyond the simple “4 years from start” calculation.

Quick example (illustrative)

• Accident/injury date: Jan 15, 2022
• Baseline SOL: 4 years under Wyo. Stat. § 1-3-105(a)(iv)(C)
• Baseline deadline (before tolling and before considering discovery/knowledge variations): Jan 15, 2026

Enter your real dates in DocketMath to produce the exact computed deadline for your situation.

Reminder: This is general timing information, not legal advice. If you have complex facts (late discovery, disability, concealment, or special procedural contexts), consider getting advice from a qualified attorney.

Sources and references

Start with the primary authority for Wyoming and confirm the effective date before relying on any output. If the rule has been amended, update the inputs and rerun the calculation.

• Wyo. Stat. § 1-3-105

Related reading

• Choosing the right statute of limitations tool for Vermont — How to choose the right calculator
• Statute of limitations in Singapore: how to estimate the deadline — Full how-to guide with jurisdiction-specific rules
• Choosing the right statute of limitations tool for Connecticut — How to choose the right calculator