How to run Offer Of Judgment Analyzer in DocketMath for Georgia

Step-by-step

Run this scenario in DocketMath using the Offer Of Judgment Analyzer calculator.

This guide walks you through running the Offer Of Judgment Analyzer in DocketMath for Georgia (US-GA). You’ll use the tool’s jurisdiction-aware rules and the Georgia offer-of-judgment standard set out in Ga. Code Ann. § 9-11-68.

1) Open the tool

1. Go to the primary call-to-action: /tools/offer-of-judgment-analyzer
2. Confirm you’re on the correct tool page for calculators and analyzers.

2) Select Georgia (US-GA) rules

Within the tool settings (often near the top of the analyzer):

• Choose Jurisdiction: US-GA (Georgia)
• If the interface asks for verification, proceed with that confirmation.

DocketMath will apply Georgia’s offer-of-judgment rule for Ga. Code Ann. § 9-11-68.

3) Enter the offer amount (offeror’s offer)

Provide the offer made by the offeror in dollars.

Helpful checklist:

If the tool asks for an “offer date,” fill it only if it’s required by the calculator logic. Otherwise, keep focus on the amounts.

4) Enter the judgment amount (offeree’s outcome)

Provide the judgment obtained by the offeree in dollars.

Make sure the judgment figure aligns with what you’re comparing:

5) Review the analyzer’s Georgia threshold logic

For Georgia, Ga. Code Ann. § 9-11-68 provides a fee-shifting trigger:

• Under Ga. Code Ann. § 9-11-68, a party “may be entitled to recover attorney’s fees and expenses of litigation” when the judgment obtained by the offeree is at least 25 percent less than the offer made by the offeror.

In practical calculator terms, the analyzer checks whether:

• **Judgment ≤ Offer × (1 − 0.25)
• Meaning: Judgment ≤ Offer × 0.75

6) Run the calculation

Click Calculate / Analyze / the tool’s equivalent button.
DocketMath will output whether the 25% less condition is met and show the relevant comparisons.

7) Interpret the output

Look for:

• A pass/fail style indicator (met threshold vs. not met)
• The computed 25% threshold amount (often expressed as Offer × 0.75)
• The computed comparison result (e.g., judgment is below threshold)

If the tool provides both:

• Threshold value (Offer × 0.75)
• Difference (Offer − Judgment)

use both to sanity-check your entries.

8) Adjust inputs and compare scenarios

Because this analyzer is designed for planning, try multiple runs:

A quick way to do scenario analysis:

• Hold Offer constant
• Change only Judgment
• Observe where the results flip relative to Offer × 0.75

Quick reference: Georgia fee trigger threshold (Ga. Code Ann. § 9-11-68)

Common pitfalls

These are the issues that most often cause the analyzer’s output to surprise you:

1. Using the wrong judgment figure

   • If your “judgment” number is missing components (or includes something you didn’t intend), the 25% comparison can flip.
   • Example pattern: one run uses a gross figure; another run uses net after adjustments.

2. Confusing “offer amount” with “settlement paid”

   • The statute comparison is between the offer and the judgment obtained by the offeree.
   • A settlement payment is not automatically the same thing as a judgment.

3. Assuming the threshold is flexible

   • The language is “at least 25 percent less,” which maps to a cutoff of 75% of the offer:

     • If judgment is exactly 25% less, it should satisfy the “at least” language.
   • Small rounding differences can matter depending on how you enter numbers.

4. Assuming claim-type-specific rules that weren’t loaded

   • This guide reflects the general/default rule for Georgia under Ga. Code Ann. § 9-11-68.
   • If your dispute context involves additional requirements not represented by the analyzer inputs, the tool may not capture those nuances.

5. Entering amounts with inconsistent formatting

   • Use standard numeric entries. Avoid commas, currency symbols, or mixed units if the UI doesn’t accept them.

Try it

Use this quick hands-on example to test the analyzer workflow in DocketMath for Georgia:

Open the Offer Of Judgment Analyzer calculator and follow the steps above: Run the calculator.

Capture the source for each input so another team member can verify the same result quickly.

Example scenario

• Offer amount: $200,000
• Threshold for “at least 25% less”:

  • 200,000 × 0.75 = $150,000
• Try two judgment entries:

What to look for in DocketMath’s output

After you run each case, confirm:

• Does the analyzer display the computed threshold?
• Does it mark the correct pass/fail outcome based on the comparison?
• Are the figures consistent with Ga. Code Ann. § 9-11-68’s “25 percent less” requirement?

If you want a second check, repeat the exercise with a different offer:

• Offer: $500,000
• Threshold: $375,000
• Sweep judgments around that cutoff to see exactly where the tool changes state.

Once your runs align with the math above, you’ll be confident the tool is set correctly for US-GA and applying § 9-11-68’s default standard.

For Georgia, the governing rule you’re testing is grounded in:

• Ga. Code Ann. § 9-11-68 (fee shifting when judgment is at least 25% less than the offer)

Related reading

• Offer of Judgment Analyzer Guide for Alabama
• Offer of Judgment Analyzer Guide for Arizona
• Offer of Judgment Analyzer Guide for Colorado