Worked example: Alimony Child Support in Wyoming

Example inputs

Run this scenario in DocketMath using the Alimony Child Support calculator.

This worked example shows how DocketMath’s alimony-child-support calculator can be used for a Wyoming (US-WY) scenario. It’s meant to be practical math/walkthrough content and not legal advice. If you want to try the same workflow, open the calculator here: /tools/alimony-child-support.

Scenario assumptions (monthly amounts)

We’ll model a fact pattern where a court order addresses both child support and alimony. These numbers are examples for demonstrating how the inputs affect the results.

• Parent A income (gross monthly): $6,500
• Parent B income (gross monthly): $4,000
• Children: 2
• Parent A pays child support / Parent B receives: yes
• Parent A alimony obligation: yes
• Parent A proposed alimony start month: 0 (current month)
• Child-related expenses adjustment toggle: off (default)
• Number of months to calculate: 12

Optional: timing / enforcement context (Wyoming civil limitations)

DocketMath can also help you think through “how long” issues may remain relevant, but the payment calculation itself is separate from statutes of limitation. For Wyoming, the jurisdiction data provides a general/default statute of limitations:

• 4 years under Wyo. Stat. § 1-3-105(a)(iv)(C)
• Source: https://www.wyoleg.gov/

What you enter into DocketMath (conceptually)

In DocketMath’s Alimony + Child Support workflow, you typically provide:

• income for both parents (in the calculator’s expected format—often monthly),
• number of children,
• which parent is the support payer and which is the receiver,
• whether alimony should be included,
• and the time horizon (how many months to run).

Because calculators can treat deductions, credits, or other adjustments differently, the most important practical step is to ensure your inputs match the calculator’s assumptions and toggles (for example, leaving the child-related expense adjustment off in this run, because that’s how we’re modeling it).

Example run

This example runs a single 12-month calculation using the inputs from the previous section (assuming no income changes over the year and using the same toggles).

Run the Alimony Child Support calculator using the example inputs above. Review the breakdown for intermediate steps (segments, adjustments, or rate changes) so you can see how each input moves the output. Save the result for reference and compare it to your actual scenario.

Step 1: Feed incomes and children into DocketMath

Using:

• Parent A: $6,500/mo
• Parent B: $4,000/mo
• Children: 2
• Include alimony: Yes
• Months: 12

DocketMath then generates outputs for each month in the selected period (in this simplified example, the values are consistent month-to-month because the incomes are held constant).

Step 2: Read the outputs (what to look for)

A worked example is most helpful when it explains what each output “means” and why it changes. In this type of workflow, you can focus on these buckets:

Step 3: Example results (illustrative)

For illustration, assume DocketMath computes the following monthly estimates under these inputs:

• Child support: $1,050 / month
• Alimony: $550 / month
• Combined: $1,600 / month

Over 12 months, totals would be:

• Child support: $1,050 × 12 = $12,600
• Alimony: $550 × 12 = $6,600
• Combined: $1,600 × 12 = $19,200

Practical note: These figures are illustrative to demonstrate structure. When you run the calculator with your exact numbers, your output may differ depending on the tool’s internal modeling and the specific alimony/child-support assumptions enabled by your selections.

Step 4: Wyoming limitations timeline as context (not math)

Separate from payment computation, you may see the Wyoming general/default civil statute of limitations referenced for timing-related planning:

• 4 years under **Wyo. Stat. § 1-3-105(a)(iv)(C)

In general terms, that means a claim falling into the general bucket would have a 4-year window from the triggering event (the precise trigger varies by claim type and facts).

Sensitivity check

Now change a few inputs that typically have the biggest practical effect. The goal is to show directionality—how outputs tend to move when a key lever changes.

To test sensitivity, change one high-impact input (like the rate, start date, or cap) and rerun the calculation. Compare the outputs side by side so you can see how small input shifts affect the result.

Sensitivity scenario A: Parent A income decreases by 10%

Change:

• Parent A from $6,500 → $5,850 (10% decrease)
• Parent B stays $4,000
• Children stays 2
• Alimony enabled stays Yes
• Months stays 12

Expected movement (directionally):

• Child support typically decreases because the payer’s income is lower relative to the overall situation.
• Alimony typically decreases because the income disparity narrows (subject to the calculator’s alimony assumptions).

Illustrative directional results:

• Child support might drop from $1,050 → $900
• Alimony might drop from $550 → $450
• Combined might drop from $1,600 → $1,350

Sensitivity scenario B: Increase children from 2 to 3

Change:

• Children from 2 → 3
• All else stays the same

Expected movement (directionally):

• Child support increases because child count is a direct driver in most support models.
• Alimony may stay similar or adjust modestly depending on how the calculator models the relationship between alimony and child-related pressure.

Illustrative directional results:

• Child support might increase from $1,050 → $1,200
• Alimony might remain near $550 (or adjust slightly)
• Combined might increase to roughly $1,750

Sensitivity scenario C: Turn off alimony inclusion

Change:

• Keep child support inputs the same
• Switch alimony to off in the calculator

Expected movement:

• The combined total becomes essentially the child support line only.

Illustration:

• Child support: $1,050
• Alimony: $0
• Combined: $1,050

Track the deltas (compare what changes)

A delta table helps you interpret changes quickly:

Why this matters in Wyoming practice

Even though the calculator is focused on support amounts, Wyoming’s general/default 4-year limitations period (cited above as Wyo. Stat. § 1-3-105(a)(iv)(C)) is a separate concept that can affect planning around the timing of certain actions.

Related reading

• Alimony & Child Support Estimator Guide for Alabama
• Alimony & Child Support Estimator Guide for Arizona
• Alimony & Child Support Estimator Guide for Colorado